The Gelatinous Cube tutorial:

Here it is, at last. The long-awaited tutorial on making gelatinous cubes.

Here are the steps:

First, you need to make an “original” that you will use to create a mold. Once you have a mold, you can cast as many copies of the original as you like, using clear resin to create the iconic gelatinous cube look. I started with a small cube made of aluminum foil and some Sculpey clay:

Starting Cube

Then you work the Sculpey until it is malleable enough to cover the aluminum cube. This is when you “sculpt” it. I tried to make mine look sort of undulating and as if it was caught in the middle of some pulsating as it moved. I don’t think there’s really any “right” or “wrong” way to sculpt one so long as it it generally cubical. I did make mine a bit too large, which isn’t a problem for 2.5D tiles, but creates a tight fit in 3D block dungeons. If I make a new one I’ll make it deliberately smaller so it fits better. This photo is actually one I did just for this tutorial, I lost my original block in our move. I had some black paint on my fingers when I did the sculpting so it got all over the Sculpey clay. Which is fine since the color of this is pointless.

Sculpey original

Next you’ll need to make a silicon mold. I did this years ago and didn’t film it then, so I’m linking to another youtube video for the instructions on how to make a simple mold. This is much easier than “two-part” molds and really just involves making a box to hold the mold material, mixing it up and then pouring it over your original.

You should end up with something like this:

The mold

Now the fun starts. You’ll need some clear resin. For this miniature I’m using this stuff. Mix up enough to fill in the “bottom” of the mold, which should be the “top” of the final miniature. You generally don’t want the embedded items in the gelatinous cube to be at the very edge of the cube, you want there to be some depth to them. I usually do about 1/5 to 1/4 of the cube.

Resin and mold

You are going to need some “volunteers” to put inside the cube. In this photo the bottom layer of resin has already been poured. It is still curing though, this resin takes about 36 hours to fully cure. I was impatient and paid a price for not waiting that long. Anyway, once I had the bottom filled, I took these minis and decided they would be the “victims” that the cube had eaten. One is a mage knight mini that I don’t care for much, and the other is a zombie from the infamous “bag of zombies.”

Sacrificial Minis

Here is where I made a multitude of mistakes. As mentioned above, I waited until the resin was firm, but not until it was fully cured. Then, to hide where I had cut the base from the miniature, I painted the “shoes” black. Unfortunately, again due to my impatience, I didn’t let that fully dry before putting the miniature in the resin. More on that later. Anyway, in this image I have put the miniatures into the mold, resting on the not-fully-cured bottom layer of resin, and poured another 1/3 or so amount of resin to fill it about halfway up. You have to do this in sections if you don’t want all the items you put into the cube to just line up at one level. Which makes making one of these things a multi-day project. My problem was that because I didn’t allow the bottom layer to fully cure before putting the first mini in the mold, that mini, over the course of hours, slowly sank to the bottom so that its feet now rest almost on the top of the cube. I did allow the next layer to cure more before putting the second mini in.

Intermediate Pour

Once that layer has cured, you can put the final bits in and fill it to the top.

Fully poured

And then, after at least 48 hours, you can pull this out of the mold:

Finished Cube

The worst thing about this cube is that the paint I put on the “shoes” after cutting off the bases wasn’t quite dry and sort of dissolved into the resin. I’m not sure how much that affects the final result, but it annoys me.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s